![]() ![]() This is what gives you the "press blahblah to enter the LSI boot configuration utility" text when the server boots. If you need to boot from drives connected to this adapter, you'll need to flash a boot image to it. I am getting warning that my 'firmware version is out of date. Note: flashing these can add up to 2 minutes to server boot time if you have a lot of drives. I have a T620 server with a PERC H310 Adapter and am running VMWare. Unless you also need to flash boot images for booting off the card, you can now ditch all the live images and reboot back into your normal system, and enjoy your IT mode card. For instance on the H310 Mini, it goes from 25 with the stock Dell RAID firmware to 600 with the LSI IT firmware. So before starting to flash the firmware, let’s create a USB drive which can boot into DOS and into the UEFI shell. ![]() And to flash the raid card one part of the process needs to be done from the UEFI Shell. NVDATA Version (Persistent) : 14.01.00.08 How to flash the Dell PERC H310 with IT mode firmware Since the motherboard inside the PC is a ASUS Sabertooth FX990 it uses UEFI BIOS.
0 Comments
Leave a Reply. |